Detailed Product Description

1. Property:

Appearance: white or pale powder

Melting range: 200~250°C

Volatile: ≤1.5%

2. Application: Matting curing agent D68 is the salts of polycarboxylic acid with cyclic amidine.
The hardener, applied in suitable formulations, can produce epoxy or hybrid coatings
for matt or semi-matt gloss with very good flowing and properties. Variationbetween matt and semi-matt surface can be obtained by means of suitable adjustment
of formulation.

D68 is a leveling agent with silica carrier. It's noted that the achievement of
matt effect and relevant puppetries of the film is connected with full cured ofcoatings. Thus, the following cure schedules are recommended.

180°C, 20~25min

190°C, 10~12min

200°C, 8~10min

3. Storage and notice:

1) This material can be stored for a very long period in closed container

2) Touching with skin and eyes should be avoided

3) Please wear dust mask while in operationPacking: N.W.: 20kgPolyethylene-lined, multi-ply paper sacks

The information herein is to the best of knowledge. As the using conditions are not under our control, no guarantees are given. For liability on our side, we referto general standard items and conditions printed in the brochure.